Question # 1 of 10 ( Start time: 08:03:43 PM ) Total Marks: 1
A transparent mode means _____________
Select correct option:
The changes in the data at the inputs of the latch are seen at the output ok
The changes in the data at the inputs of the latch are not seen at the output
Propagation Delay is zero (Output is immediately changed when clock signal is applied)
Input Hold time is zero (no need to maintain input after clock transition)
Question # 2 of 10 ( Start time: 08:04:16 PM ) Total Marks: 1
____________ is said to occur when multiple internal variables change due to change in one input variable
Select correct option:
Hold and Wait
Clock Skew
Race condition ok
Hold delay
Question # 3 of 10 ( Start time: 08:04:51 PM ) Total Marks: 1
The _____________ input overrides the ________ input
Select correct option:
Asynchronous, synchronous ok
Synchronous, asynchronous
Preset input (PRE), Clear input (CLR)
Clear input (CLR), Preset input (PRE)
Question # 4 of 10 ( Start time: 08:05:18 PM ) Total Marks: 1
Divide-by-160 counter is acheived by using
Select correct option:
Flip-Flop and DIV 10
Flip-Flop and DIV 16
DIV 16 and DIV 32
DIV 16 and DIV 10
Question # 5 of 10 ( Start time: 08:05:49 PM ) Total Marks: 1
Flip flops are also called _____________
Select correct option:
Bi-stable multivibrators ok
Bi-stable singlevibrators
Bi-stable dualvibrators
Bi-stable transformer
Question # 6 of 10 ( Start time: 08:06:28 PM ) Total Marks: 1
An Astable multivibrator is known as a(n) _______
Select correct option:
Oscillator ok
Booster
One-shot
Dual-shot
Question # 8 of 10 ( Start time: 08:07:09 PM ) Total Marks: 1
The Synchronous counters are also known as Ripple Counters:
Select correct option:
True
False
Question # 9 of 10 ( Start time: 08:07:38 PM ) Total Marks: 1
The counter states or the range of numbers of a counter is determined by the formula. (“n” represents the total number of flip-flops)
Select correct option:
(n raise to power 2 )
(n raise to power 2 and then minus 1)
(2 raise to power n)
(2 raise to power n and then minus 1)
Question # 10 of 10 ( Start time: 08 :09:07 PM ) Total Marks: 1
RCO stands for __________
Select correct option:
Reconfiguration Counter Output
Ripple Counter Output
Reconfiguration Clock Output
Ripple Clock Output ok
